TP amplifier series

TP series amplifier is the hybrid amplifier adopts vacuum tubes in the preamplifier stage which have been settled to be used as the best matched tubes with their own character of TP series after a long term listening test and the making many comparison tests of A tube and B tube.

Finally current tube was selected. Consequently its combination of the vacuum tube and the well designed transistor circuit layout achieved warm snd smooth sounds that can compensate hard and cold sounds of which usual transistor amplifiers can easily reproduce.

Accoustic - tuning

The accoustic tuning which succeeds to the way of AP2.25i amplifier comes into the operation on all of TP amplifiers. The best matched hi-end audio grade condensers made in Japan are cast in important parts where influence the sound characteristics of amplifier thoroughly for pursuing good quality sounds.

Body - work

TP has the body -work which succeeds to the design image of RE amplifier. Its body consists of the solid aluminum plate and the thick aluminum top and bottom plates and it realized functional beauty and the good radiation ability of heat.

You can feel the image of the excellent article from its professional style.

TP 2.150

TP 2.150 is the high grade 2 channel hybrid transistor amplifier which used two vacuum tubes in preamplifier stage. TP2.150 attains the outstanding ability for reproducing warm, smooth, tasty and dynamic sounds.

Specification
Power output          14.4V/4ohm 150W x 2
1KHz at THD            14.4V/2 ohm 220W x 2
Frequency response                   2 - 80KHz
S/N ration                                     >90dB
Stereo separation                             75dB
Idle current                                       1.3A
Remote voltage                           10 - 17V
Input impedance                            20Kohm
Input sensitivity                            0.2 - 4V
Crossover frequency (HP)          50 - 200Hz
Fuse type                                     15A x 4
Dimension (WxLxH)mm             452x200x59

TP 4.100

TP 4.100 is the high grade 4 channel hybrid transistor amplifier which used four vacuum tubes in preamplifier stage. TP4.100 attains the outstanding ability for reproducing warm, smooth, tasty and dynamic sounds.

Specification
Power output          14.4V/4ohm 100W x 4
1KHz at THD            14.4V/2 ohm 130W x 4
Frequency response                   2 - 80KHz
S/N ration                                     >90dB
Stereo separation                             75dB
Idle current                                       2.0A
Remote voltage                           10 - 17V
Input impedance                            20Kohm
Input sensitivity                            0.2 - 4V
Crossover frequency (HP)          50 - 200Hz
Fuse type                                     15A x 4
Dimension (WxLxH)mm             452x200x59

PHASS CAR AUDIO EQUIPMENT - FT TRADING LTD.

The pursuing of vivid sound