PHASS CAR AUDIO EQUIPMENT - FT TRADING LTD.

MAKING MUSIC SOUND REAL

Home
日本語トップ
ファスプロダクツ
English Top
Phass products
Site map
Distributors
Contact us
 AP & HP series amplifier

AP and HP are the high class S.E.P.P.( Single End Push Pull ) amplifier produced under the concept of "The right part in the right place".  The careful selection of best matched electric parts can contribute to high quality sound on their own positions of PCB has been realized by our skilled technicians.  This attempt called the acoustic tuning contributes the reproduction ability of expression for the detail of music supported by vivid and realistic sound. Both series of AP and HP feature the natural tones.

 
AP and HP line-up
 

 New !

 AP 80.2 2チャンネルアンプ

 

従来機AP2.100iの高い実力はそのままに、フルモデルチェンジを受けたモデルがAP80.2です。TPシリーズと共通のボディーワークを持ち、機能美の追求と、AP2.25iからの適材適所の基本コンセプトを踏襲、高音質化を実現したコストパフォーマンスに優れた2チャンネルアンプです。

 

標準小売価格:78,750円(税込) 

 

 

アウトプットパワー:(13.8V/4ohm)-80Wx2, 1KHz 0.3%THD 14.4V/2ohm-120Wx2 ・周波数特性:2-80KHz・S/Nレシオ:>90dB・ステレオセパレーション:75dB・アイドル電流:1.3A・リモート電圧:10-17V・入力インピーダンス:20Kohm・入力感度:0.2-4V・クロスオーバー周波数(HP&LP):50-200Hz・ヒューズタイプ:15Ax2・サイズmm:280(W)x200(L)x59(H)

New !

 AP 75.4 4チャンネルアンプ

 

従来機AP4.65iの高い実力はそのままに、フルモデルチェンジを受けたモデルがAP75.4です。TPシリーズと共通のボディーワークを持ち、機能美の追求と、AP2.25iからの適材適所の基本コンセプトを踏襲、高音質化を実現したコストパフォーマンスに優れた4チャンネルアンプです。

 

標準小売価格:92,400円(税込)

 

 

アウトプットパワー:(13.8V/4ohm)-75Wx4, 1KHz 0.3%THD 14.4V/2ohm-110Wx4 ・周波数特性:2-80KHz・S/Nレシオ:>90dB・ステレオセパレーション:75dB・アイドル電流:1.3A・リモート電圧:10-17V・入力インピーダンス:20Kohm・入力感度:0.2-4V・クロスオーバー周波数(HP&LP):50-200Hz・ヒューズタイプ:15Ax2・サイズmm:320(W)x200(L)x59(H)

 AP 2.25i  2チャンネルアンプ

 

高音質パーツの適切配置による、小パワーの利点を最大限発揮する、ダイナミックなスモールアンプの本格機です。信頼の高音質アンプとしてリスナーから長期にわたる支持を獲得しています。

 

標準小売価格:51,450円(税込)

 

 

アウトプットパワー:(12.5V/0.1%THD/4ohm)-25Wx2, 13.8V/1%THD/2ohm-35Wx2 ・周波数特性:10-80KHz・S/Nレシオ:>100dB・ダンピングファクター:>200・歪率:THD0.05%

・アイドル電流:0.4A・入力インピーダンス:10Kohm・入力感度:0.2-4V・ヒューズタイプ:10Ax1・サイズmm:225(W)x135(L)x56(H)

 
 

 

 

 

 

 

 

 

 

HP 2.50

HP 2.50

Basically HP2.50 is a powered up model of AP2.25i amplifier. Many electric parts which influence the sound quality are carefully selected and applied the concept of "Right parts in right place".

It transmits high quality musical signal to speakers and performs the high driving ability filled with fresh and vivid sounds.  

 

Specification
Max power 13.8V 1%THD/2ohm          80Wx2
Rated power 12.5V  0.1%THD/4ohm    50Wx2
Frequency response                           10-80KHz
S/N ratio                                            >100dB
Damping factor                                   >200
Idle current                                         0.5A
Distortion                                           THD 0.05%
Input impedance                                 >10Kohm
Input sensitivity                                   0.2 - 7V RMS
Crossover frequency (HP)                    50-200Hz
Fuse type                                          20A
Dimension:WxLxHmm                        235x200x53

 

 

 

 

 

 

HP 4.75

HP 4.75

HP4.75 is the high class amplifier which makes HP2.50 into 4 channel bridgeable amplifier. The sound characteristics of it which was applied further sound tuning evolved into the stable amplifier which never appeal its existence. HP drives the connected speakers definitively and precisely.   

 

Specification
Max power 13.8V 1%THD/2ohm         80Wx4
Rated power 12.5V  0.1%THD/4ohm   65Wx4
Frequency response                          10-80KHz
S/N ratio                                           >100dB
Damping factor                                  >200
Idle current                                        1A
Distortion                                          THD 0.05%
Input impedance                                >10Kohm
Input sensitivity                                  0.2 - 7V RMS
Crossover frequency (HP)                   50-200Hz
Fuse type                                         20Ax2
Dimension:WxLxHmm                       235x300x53